I have a Dell 650 Workstation that I bought used. I use it primarily as a controller for a CNC controlled router that I built in my garage. While using the CNC Router tonight, I ran into a problem with the router, and went to fix it. When I returned to my computer, it had the 'Windows is shutting down' screen and appeared to be frozen. I turned the computer off, and back on again.
It appeared to be booting normally, then got to a point where it said something like, 'MPT Rom installed successfully', and it would not move past that point. I rebooted several times, and it never went past this point. I have no idea what to do. I would sincerely appreciate any help anyone could give.Dave RE: 'MPT Rom installed successfully', then it hangs (Programmer) 4 Jan 09 20:09.
F.1Fusion-MPT SAS BIOS OverviewThe Fusion-MPT SAS BIOS features include:. Configuration for up to 256 adapters; any four can be chosen for INT13 (bootrom) support.
Support for Message Passing Technology (MPT). Support for the LSI53C1064 devices. Support for SAS devicesNote - At this time, these servers are shipped with support for the SAS1064 controller only.
SATA devices are not supported in these servers at this time. Support for Integrated RAID initialization (with proper firmware)The SAS BIOS is the bootable ROM code that manages SAS hardware resources. It is specific to a family of LSI Logic Fusion-MPT SAS controllers or processors. The Fusion-MPT SAS BIOS integrates with a standard system BIOS, extending the standard disk service routine provided through INT13h.During the boot time initialization, the SAS BIOS determines whether the system BIOS has already installed other hard disks, such as an IDE drive. If such drives are already installed, the SAS BIOS maps any SAS drives it finds behind these drives. Otherwise, the SAS BIOS installs drives starting with the system boot drive. In this case, the system boots from a drive controlled by the SAS BIOS.
The LSI Logic SAS BIOS supports the BIOS Boot Specification (BBS).F.1.1Boot Initialization With BIOS Boot Specification (BBS)The Fusion-MPT SAS BIOS supports the BIOS Boot Specification (BBS), which allows you to choose which device to boot from by selecting the priority.To use this feature, the system BIOS must also be compatible with the BBS. If the system supports the BBS, you can use the system BIOS Setup menu to select the boot order and drive order.
In the system BIOS Setup, the Boot Connection Devices menu lists the available boot options. Use that menu to select the device and rearrange the order. Then exit to continue the boot process. F.2Starting the SAS BIOS Configuration UtilityIf you have SAS BIOS version 6.xx, and it includes the Fusion-MPT SAS BIOS Configuration Utility, you can change the default configuration of the SAS host adapters. You may decide to change these default values if there is a conflict between device settings or if you need to optimize system performance.The version number of the SAS BIOS appears in a banner displayed on the computer monitor during bootup. If the utility is available, this message also appears during bootup:Press Ctrl+C to start LSI Logic Configuration Utility.This message remains on the screen for about five seconds, giving you time to start the utility. If you press Ctrl+C, the message changes to:Please wait, invoking LSI Logic Configuration Utility.After a brief pause, the computer monitor displays the Main menu of the Fusion-MPT SAS BIOS Configuration Utility.
Dell T100 Mpt Boot Rom Successfully Installed Windows 7
These messages may appear during the boot process:. Adapter removed from boot order!This message appears when an adapter was removed from the system or was relocated behind a PCI bridge. Adapter configuration may have changed, reconfiguration is suggested!This message appears if none of the information in the NVRAM is valid. Updating Adapter List!This message appears when fewer than four adapters are in the boot order and more adapters exist than are shown.Caution - The SAS BIOS Configuration Utility is a powerful tool.
If, while using it, you somehow disable all of the controllers, press Ctrl+E (or Ctrl+A on versions earlier than 5.00) after memory initialization during reboot to re-enable and reconfigure the controllers.Note - Some devices detected by the Configuration Utility cannot be controlled by the SAS BIOS. Devices such as tape drives and scanners require that a device driver specific to that device be loaded. However, the SAS BIOS Configuration Utility does allow you to modify parameters for these devices. F.3Configuration Utility ScreensAll SAS BIOS Configuration Utility screens are partitioned into the following areas, starting at the top of the screen:.
Header Area: This area lists static information text, including the product title and version. Menu Area: This area lists the current screen title and controller information when on screens other than Adapter List. Main Area: This is the main area for presenting data. This area has a cursor for item selection, horizontal scrolling, and vertical scrolling.
The horizontal and vertical scroll bars appear here if needed. Footer Area: This area provides general help information text.Note - The screens shown in this appendix are examples. The version numbers and the screen items shown are subject to change over the life of the product.F.3.1User Input KeysThe general key inputs that are listed in apply on all screens of the SAS BIOS Configuration Utility.TABLE F-1 User Input KeysKeyDefinitionDescriptionF1HelpContext-sensitive help for the field in which the cursor is positioned.Arrow keysMove cursorUp, down, left, right movement to position the cursor.Home/EndSelect itemSelect the item in which the cursor is positioned.+/-Change itemItems with values in brackets are modifiable.
Dell T100 Mpt Boot Rom Successfully Installed Price
Numeric keypad + and numeric keypad - update a modifiable field to its next relative value.EscAbort/ExitThe Esc key aborts the current context operation and/or exits the current screen. The user is asked to confirm, if changes have been made.EnterExecute Executable items are indicated by highlighted text and a different background color. Press Enter to execute the item’s associated function.Throughout the GUI, selections that are not currently permissible are grayed out.The behavior of executable items varies throughout the Configuration Utility.F.3.2Adapter List ScreenWhen you start the Fusion-MPT SAS BIOS Configuration Utility, the Adapter List screen (shown below) appears. This screen displays a scrolling list of up to 256 LSI Logic SAS host adapters in the system and information about each of them. Describes the fields in this screen.Use the arrow keys to select an adapter, then press Enter to view and modify the selected adapter’s properties (and to access the other screens). After you select an adapter and press Enter, the adapter’s devices are scanned and the appears.To change the Adapter boot order, use the -, +, Insert, and Delete keys while on the Boot Order field.
Press Insert or Delete to add or remove an adapter to or from the boot order. Press the - and + keys to modify an adapter’s position in the boot order. If you make changes to the boot order, the Configuration Utility prompts you to save the changes before you exit the screen.From the Adapter List screen (shown below), you can also press Alt+N to access the Global Properties screen. F.4Performing RAID Configuration TasksThis section contains the following information and instructions for using the Configuration Utility to set up RAID:.Note - The RAID firmware needs at least 64 MB of unused disk space at the end of each drive to store metadata.F.4.1RAID Implementation and SupportThe LSISAS1064 controller supports the Integrated RAID hardware solution, which is a highly integrated, low-cost RAID solution.
It is designed for systems requiring redundancy and high availability, but not requiring a full-featured RAID implementation.Integrated RAID includes Integrated Mirroring (IM or RAID 1) and Integrated Striping (IS or RAID 0) technology. Integrated RAID is OS independent, easy to install and configure, and does not require a special driver. A RAID Volume is seen as a single drive by the host BIOS and OS.The LSISAS1064 controller is based on the Fusion-MPT (Message Passing Technology) architecture. The Fusion-MPT architecture requires only a thin device driver that is independent of the I/O bus. LSI Logic provides the device drivers for various operating environments.The ILOM Service Processor monitors the GPIOs from the SAS1064 controller. If the controller indicates a failure, the service processor lights the fault LED on the corresponding disk drive and logs the error in the SP event log.F.4.1.1Automatic Data Resynchronization and HotsparesCaution - Possible data loss: If you insert an drive that has been configured with a RAID volume into a server that did not previously have its drives configured with RAID volumes, the existing drive(s) in the server will be converted to RAID volumes during automatic synchronization and any existing data on the existing drive(s) in the server will be erased. Before permanently removing an drive that is part of an active RAID volume, use the LSI Configuration Utility to delete the RAID volume from the drive to avoid causing this problem.The SCSI parameters, including RAID volumes configuration, are set up using the LSI BIOS configuration utility accessible by pressing the CTRL+C keys during the boot process.
The LSI RAID firmware and BIOS is OS-independent and you set up RAID while in MPTBIOS POST, before booting to an OS.The parameters are saved in both the NVRAM and the disk drives. The RAID firmware needs 64 MB of unused disk space at the end of each drive to store the metadata.The metadata stored on the disk drives contains sufficient information to restore and reactivate the RAID volumes in case the NVRAM is lost (for example, when the motherboard is replaced). However, if removed, the disk drives must first be labelled to make sure that they are placed back in the same disk bays from which they were removed when reinstalled. When the system is powered on, the RAID volumes are automatically activated and resynchronization is automatically performed.One of the disk drives can be set up as a hotspare disk if a RAID 1 (mirroring) volume is already set up. If one of the two disk drives used in the RAID 1 volume fails, the hotspare drive automatically replaces it in the volume and resync is immediately performed.It must be noted that, until the resync is completed, the system is vulnerable to a failure of the now “primary” disk (the disk left from the original mirrored volume) since full data redundancy is not yet achieved.